A gas cooker must be disconnected by a Queensland gasfitter whose licence covers removal and alteration, not only appliance servicing.
The gasfitter assesses the connection, isolates the applicable supply, disconnects the cooker and leaves the affected installation safe for its intended future use. They then test the completed work and meet the applicable Queensland certificate duties.
There is no useful standard price without seeing the installation. Access, appliance design, pipework condition, testing, electrical work and the required end result all shape the quote.
What happens during a permanent disconnection?
Queensland defines gas work broadly. It includes removing or altering a gas system, testing it and certifying work where required.
A domestic cooker is a type A gas device. A full gas work licence can cover type A removal and alteration, although the conditions on the individual licence still matter.
The practical sequence depends on the site, but the licensed work normally follows these decisions:
- Confirm the plan: Decide whether the cooker is being serviced, replaced with gas, changed to electric or removed without replacement.
- Inspect the installation: Identify the fuel, connection, isolation arrangement, access and remaining appliances before disturbing the system.
- Licensed disconnection: The gasfitter isolates the applicable supply and completes the removal and pipework alteration within their licence scope.
- Completion test: The gasfitter checks the affected system before any remaining installation is returned to use.
- Document the work: Complete the Queensland compliance process that applies to the finished installation.
The exact treatment of a redundant connection is an installation decision. Its location, branch layout and intended future use determine how the gasfitter leaves it compliant and safe.
This is why a homeowner should not pull out the cooker, loosen its fitting or fit a cap. The visible appliance connection may not reveal the layout or condition behind it.
Why does the gasfitter's licence scope matter?
A Queensland gas work licence for servicing does not authorise permanent removal, installation, alteration or general certification. It allows disconnection and reconnection of an existing appliance only for servicing.
An interim gas licence can cover certain type A work, but the holder cannot certify it. A full licence holder must check and certify installation work completed under that interim licence.
You can check current credentials through the Resources Safety and Health Queensland Portal. Match the licence and its conditions to the work being quoted, rather than relying on a trade label.
Our guide to removing redundant gas pipework explains when a cooker job can extend beyond the appliance connection.
Does a dual-fuel cooker also need electrical work?
It depends on how the appliance is connected. A plug-in lead and fixed wiring are different electrical scopes, so the connection must be checked before removal.
Any electrical work needs a person whose Queensland electrical licence permits that exact task. Some gasfitters hold restricted electrical licences, but those licences apply only within their recorded conditions.
Gasfitting credentials alone do not prove electrical authority. The guide to choosing trades for an oven or cooktop helps separate the gas, electrical and building scopes.
What testing and documents follow the work?
The gasfitter tests the affected installation after completing the disconnection and any alteration. The test scope follows the actual work and remaining system, not a homeowner checklist.
Queensland gas compliance certificates and defect notices are managed through the RSHQ Portal. Completed installation work requires the applicable certificate to be provided to the owner or operator and, where relevant, the network operator.
Most Queensland gas installations no longer need a physical compliance plate after the rules changed. A certificate and a plate are different records, so ask which document applies to the completed work.
Read how Queensland gas compliance certificates work before filing the document with the property's records.
If the gasfitter identifies a safety concern, the normal completion plan may change. The issue may need immediate rectification, a defect notice or further risk controls before the system can be used.
What should the quote spell out?
A clear quote should distinguish the licensed disconnection from related work. Check whether it includes:
- Intended outcome: Service, gas replacement, electric replacement or permanent removal without a new cooker.
- Appliance access: Moving a freestanding unit, releasing a built-in cooker or coordinating cabinetry and benchtop access.
- Gas scope: Disconnection, the agreed result for redundant pipework, testing and applicable compliance documentation.
- Electrical scope: Verification of the connection and any work requiring an appropriately licensed electrical worker.
- Condition: Extra work needed if fittings, valves or pipework are damaged, corroded, inaccessible or otherwise unsuitable.
- Handling: Lifting, removing and disposing of the old cooker, where those tasks are requested.
- Separate services: Retailer or network work if the property owner also wants the gas supply or meter abolished.
Disconnecting one cooker does not automatically close the gas account or remove network equipment. Tell the gasfitter if abolishing the whole service is part of the plan.
If you are changing fuel, compare the separate appliance, electrical and building decisions in our guide to planning a gas-to-electric cooktop change.
What should you do if you smell gas?
Do not use flames or operate electrical switches. Open doors and windows, turn off the appliance, and isolate the supply only if it is safe and you know how.
If the smell continues, contact the gas supplier or a licensed gasfitter from a safe place. Call Triple Zero if the smell remains after isolation.
For a fire, explosion, uncontrolled leak or immediate danger, evacuate and call Triple Zero immediately. Follow the current Queensland Government gas-safety guidance.
For a planned disconnection, book the gas cooktop team to inspect the installation and define the licensed gas scope before the cooker is moved.